Need install help, having issue:
Going from a system with 3 vip dual tuner receivers, DPP44 switch and 4 satellite setup (119, 110, 129, 118.7) using a dish 1000 plus, all wiring is 3ghz.
Upgrading to 1 hopper3 system, no joeys at this time.
Added power inserter on port #1 of DPP44 switch.
Added SOLO NODE to port 2 and 3 of DPP44 switch connecting to 1 and 2 on SOLO NODE.
short runs from dpp44 switch to solo node are 3ghz as well new, and center copper wire is cut appropriately.
All...
install help needed from vip to hopper 3 using dpp44
Going from a system with 3 vip dual tuner receivers, DPP44 switch and 4 satellite setup (119, 110, 129, 118.7) using a dish 1000 plus, all wiring is 3ghz.
Upgrading to 1 hopper3 system, no joeys at this time.
Added power inserter on port #1 of DPP44 switch.
Added SOLO NODE to port 2 and 3 of DPP44 switch connecting to 1 and 2 on SOLO NODE.
short runs from dpp44 switch to solo node are 3ghz as well new, and center copper wire is cut appropriately.
All...
install help needed from vip to hopper 3 using dpp44